Lockout Tagout Blogs

June 06, 2023 6 Min Read

We take ample of decisions almost every day, some decisions are personal and affect us directly, whereas some includes the surrounding we are living in. Taking the right decision is imperative in all life situations, especially at work; because now it isn’t about your personal loss or gain. In fact, the decisions you make or the […]

December 07, 2021 7 Min Read

The Occupational Safety and Health Administration (OSHA) Lockout Tagout standard (29 CFR 1910.147) mandates criteria for de-energizing equipment during servicing and maintenance operations to prevent unexpected energization or start-up of machineries. The Lockout Tagout standard requires that, “The employer shall establish an energy control program consisting of energy control procedures, employee training and periodic inspections, […]

June 07, 2023 2 Min Read

In the rapidly evolving world of industrial workspaces, safety cannot be overstated. Routine tasks like servicing or maintenance, which might seem mundane, can harbour potential hazards if not approached with caution. E-Square introduces the T.H.I.N.K approach, a comprehensive checklist that emphasizes safety awareness before diving into any task. It’s not just about ensuring that machinery […]

September 07, 2020 2 Min Read

In the continuous pursuit of establishing a safer workplace, many employers commit substantial resources, both financial and time-based, to develop and maintain effective safety programs. However, the fact that Lockout Tagout (LOTO) remains one of OSHA’s top ten most cited violations is a stark reminder of the challenges faced in ensuring workplace safety. Failure to […]

October 10, 2023 2 Min Read

The industrial landscape, with its intricate machinery, equipment, and systems, operates in a rhythmic symphony, seamlessly transitioning through various activity stages. The efficiency and safety of these operations largely hinge upon recognizing and adeptly managing the three pivotal modes that characterize the activity cycle of any organization: production, standby, and shutdown. Each mode serves as […]

January 03, 2023 2 Min Read

Today, most of the processes and much of the operational control occurs under the guidance of a microprocessor and often a graphical user interface that is accessible to the operator. The normal configuration in systems controlled by microprocessors is that the control circuit passes from the PLC (programmable logic controller) through the control switch to […]

August 08, 2023 3 Min Read

The relentless march of progress in industries worldwide has led to the development of advanced machines and complex technologies. While this progress increases efficiency and productivity, it also poses risks that must be addressed to maintain workplace safety. As professionals navigate the intricacies of industrial equipment, a fundamental rule that underlines the essence of safety […]

November 10, 2020 3 Min Read

Napoleon Bonaparte had once expressed “A leader is a dealer of hopes”. When developing and implementing an energy control system, one should not overlook or underestimate the importance of leadership. Often programs and systems flounder because of lack of this crucial ingredient. A company’s safety culture is driven by the executive leader that creates, cultivates […]

September 12, 2023 4 Min Read

Standards, protocols and regulations in every development, keeps the whole system in position. And therefore, these standards must be given priority especially when they are life saving instructions to the organizations. Here we talk about two such important standards where one is a regulatory body, approved by the government; whereas the other is a consensus […]

March 02, 2021 2 Min Read

The Occupational Safety and Health Administration (OSHA) has announced its preliminary Top 10 most frequently cited workplace safety standards for fiscal year 2020. In an exclusive webinar with Safety + Health magazine, Patrick Kapust, deputy director of OSHA’s Directorate of Enforcement Programs, presented the preliminary data, and Kevin Druley, Safety + Health associate editor, moderated […]