Lockout Tagout Blogs

3 Min Read

Industrial activity is cyclic, not haphazard in nature. Equipment and processes have different modes in the activity cycle, namely production, standby, and shutdown. The operational cycle of equipment and systems provides an important basis for creating a structured approach to assessment and control of hazardous energy. The approaches needed and available to ensure safety differ […]

2 Min Read

In the realm of industrial safety, clear distinctions between terms can be the difference between a safe work environment and catastrophic incidents. One such critical distinction in the Lockout Tagout (LOTO) procedure lies between “De-activation” and “De-energisation.” Misunderstanding or interchanging these terms can lead to grave outcomes. This article delves deep into these concepts, their […]

5 Min Read

An incident took place in March 2002. A California welder was asked to remove a jammed piece of metal from the hydraulic door of a scrap metal shredder by his supervisor. As the worker had done this several times before, he grabbed his ladder, torch, and padlock and went to the hopper. While lying across […]

3 Min Read

In an era marked by rapid technological advancements, industries have evolved with sophisticated machinery and complex equipment. These developments, while beneficial, also bring with them an array of potential hazards. One of the primary tools developed to ensure workplace safety amidst these complexities is the Lockout Tagout (LOTO) system. Central to this system’s efficacy are […]

3 Min Read

Safety, a concept easily understood but often overlooked, especially in industrial settings. Amidst the bustling corridors of industries, there’s one crucial safety protocol that stands out: Lockout Tagout (LOTO). With thousands of machineries operational, the threat of hazardous energy release poses an imminent danger. Adhering to established safety norms and guidelines, therefore, becomes paramount. Here, […]

6 Min Read

We take ample of decisions almost every day, some decisions are personal and affect us directly, whereas some includes the surrounding we are living in. Taking the right decision is imperative in all life situations, especially at work; because now it isn’t about your personal loss or gain. In fact, the decisions you make or the […]

7 Min Read

The Occupational Safety and Health Administration (OSHA) Lockout Tagout standard (29 CFR 1910.147) mandates criteria for de-energizing equipment during servicing and maintenance operations to prevent unexpected energization or start-up of machineries. The Lockout Tagout standard requires that, “The employer shall establish an energy control program consisting of energy control procedures, employee training and periodic inspections, […]

2 Min Read

In the rapidly evolving world of industrial workspaces, safety cannot be overstated. Routine tasks like servicing or maintenance, which might seem mundane, can harbour potential hazards if not approached with caution. E-Square introduces the T.H.I.N.K approach, a comprehensive checklist that emphasizes safety awareness before diving into any task. It’s not just about ensuring that machinery […]

2 Min Read

In the continuous pursuit of establishing a safer workplace, many employers commit substantial resources, both financial and time-based, to develop and maintain effective safety programs. However, the fact that Lockout Tagout remains one of OSHA’s top ten most cited violations is a stark reminder of the challenges faced in ensuring workplace safety. Failure to properly […]

2 Min Read

The industrial landscape, with its intricate machinery, equipment, and systems, operates in a rhythmic symphony, seamlessly transitioning through various activity stages. The efficiency and safety of these operations largely hinge upon recognizing and adeptly managing the three pivotal modes that characterize the activity cycle of any organization: production, standby, and shutdown. Each mode serves as […]